The next step is to mount the wing onto the wingposts. The easiest way to do this is on a table with lots of clear open space. You will also need some small boxes or cassette cases to help hold the wing in position while doing this. In this photo, I have used two cassette cases to hold the body in position, and a CD case and a cassette case under each wing to hold it up in position.

You want to make sure that the tail is tilted correctly during this process, and that the wingposts are vertical. (see the photo below).

Make sure that the wing is perpendicular to the body not cocked to one side.

Apply superglue to each side of the wingposts and then apply the accelerator. (If your wing spars do not touch the wing posts, then cut a small shim of balsa to fill in the gap.)

When you are done you will have this.

Now place the Ikara prop back onto the prop hanger and your AIRPLANE IS DONE!!!

Here is my Division B model complete and on the scale. Note that it is underweight and needs to be ballasted up to 8.0 grams.